Vortex Sound Research

Alright, I jumped off the cliff yesterday and attempted to remedy the classic Minimoog faceplate bubble issue. Here is the recap with some photos!

Pros: Looks way better!

Cons: Will never get that 5 hours of my life back, shattered a knob

Worth it I think!

Steps:

1. Reserve a 5-hour block of time. Does not need to be all at once.
2. Gather a blow-dryer, flat-head jeweler's screwdriver, razor, and ample patience.
3. Remove the top wooden frame piece, and all of the knobs.
4. Use the razor to cut around all potentiometers.
5. Have at it! Heat is key.

Note: Heat can damage electronics. Be careful out there folks!

​

https://preview.redd.it/6e0l9dujj35a1.jpg?width=4080&format=pjpg&auto=webp&s=779668ec1832a2130d7dadefc4d9da173682b380

https://preview.redd.it/x9h5xcujj35a1.jpg?width=4080&format=pjpg&auto=webp&s=b76bdf04cd1d890b8f2b9011acce97372a5ad27a

https://preview.redd.it/8uuxxjujj35a1.jpg?width=3072&format=pjpg&auto=webp&s=bc7855b3cfab2e6dc887337bf2477749dbdf0952

https://preview.redd.it/ylovgqujj35a1.jpg?width=4080&format=pjpg&auto=webp&s=0d7392e10946b3039276bc46997048ccdae06f55

https://preview.redd.it/uyti4xujj35a1.jpg?width=4080&format=pjpg&auto=webp&s=262b5868f95b147b04b821aa5dc78657f4de8b55

https://preview.redd.it/mn8hr3vjj35a1.jpg?width=4080&format=pjpg&auto=webp&s=f3a83d561e7c6f6259233d96785a87616930678f