Possible to make volca modular work with eurorack? - Printable Version +- Vortex Sound Research (http://www.n01ze.com/synthwizards/Forum) +-- Forum: N01ZE World Net News (http://www.n01ze.com/synthwizards/Forum/forumdisplay.php?fid=45) +--- Forum: World Wide Gear News (http://www.n01ze.com/synthwizards/Forum/forumdisplay.php?fid=2) +--- Thread: Possible to make volca modular work with eurorack? (/showthread.php?tid=37020)

Possible to make volca modular work with eurorack? - SynthWizard - 06-21-2022 Possible to make volca modular work with eurorack? <!-- SC_OFF --><div class="md"><p>Had a grand vision last week of converting my volca modular into a full on eurorack module by making a custom enclosure that fits in a case and then making a patchbay module that converts the jumper wire connections into full on patch cable jacks. My question here is if the cv/gate patch points on the clock section can be amplified from 0.5v/oct to full v/oct so that I can use the built in sequencer to sequence other eurorack gear, and at the same time if normal eurorack cv signals would need to be attenuated when going rack -&gt; volca so that I don't fry this thing. Not sure if there's information I'm missing or if I'm not understanding something but from my layman's perspective all I would need to do is amplify outgoing signals and attenuate incoming signals to translate between the different working voltages of each system.</p> </div><!-- SC_ON --> submitted by <a href="https://www.reddit.com/user/Oske829"> /u/Oske829 </a> <br/> <span><a href="https://www.reddit.com/r/modular/comments/vh32fc/possible_to_make_volca_modular_work_with_eurorack/">[link]</a></span> <span><a href="https://www.reddit.com/r/modular/comments/vh32fc/possible_to_make_volca_modular_work_with_eurorack/">[comments]</a></span>