0 | 0 | ||
<!-- SC_OFF --><div class="md"><p>Hi! </p> <p>I recently purchased a Doepfer MSY2 in the hopes to sync the arpeggiator/sequencer on my SH101 up to my mixer which outputs MIDI clock (XONE PX5). The problem I am experiencing is the MSY2 clock LED (and as far as I can tell the output clock) doesn't seem to match the BPM being sent from my mixer? </p> <p>Links to the equipment used:</p> <p><a href="https://www.thomann.de/gb/cordial_ed_05_aa_elements.htm">https://www.thomann.de/gb/cordial_ed_05_aa_elements.htm</a> < connecting Xone to MSY2</p> <p><a href="https://www.thomann.de/gb/the_sssnake_adapter_cable_6_3_3.5_mm.htm">https://www.thomann.de/gb/the_sssnake_adapter_cable_6_3_3.5_mm.htm</a> < connecting MSY2 to SH101 clock input </p> <p><a href="https://shopwl.com/content/XONE%20PX5%206-Channel%20Analogue%20FX%20Mixer%20-%20Manual.pdf">https://shopwl.com/content/XONE%20PX5%206-Channel%20Analogue%20FX%20Mixer%20-%20Manual.pdf</a> < Xone PX5 manual </p> <p><a href="https://doepfer.de/msy2_m_e.htm">https://doepfer.de/msy2_m_e.htm</a> < MSY2 Manual </p> <p>​</p> <p>This is my first attempt at using old analogue gear with my set up so I am very much aware I might be completely missing something, however any help would be very much appreciated. </p> <p>All the best </p> </div><!-- SC_ON --> submitted by <a href="https://www.reddit.com/user/SmifySmif"> /u/SmifySmif </a> <br/> <span><a href="https://www.reddit.com/r/synthesizers/comments/syuo38/help_with_sh101_doepfer_msy2/">[link]</a></span> <span><a href="https://www.reddit.com/r/synthesizers/comments/syuo38/help_with_sh101_doepfer_msy2/">[comments]</a></span>