0 | 0 | ||
Looking for opinions/thoughts on my planned setup. I am sort of a beginner so I am still kind of learning this whole side of the synth world. I already posted this in /r/modular, but I figured I would also make a post on the bigger more general synth sub because there is simply more traffic here.
I have NiftyCase which is 84HP. It has a built in power supply and output which doesn’t consume HP. I have compiled a list of modules I am planning for the unit and just wanted some feedback just to see if anyone saw any potential gaps or areas I may be overlooking. I will probably doing sequencing with my Arturia Key Step and am potentially looking into getting a Korg SQ-1 if I see a good deal.
Here is the list of planned modules. The numbers next to them are the individual HP and then the total occupied HP. For the modules I already own I put asterisks next to them. I also put a description of what I plan to use them for
- Make Noise Maths* (LFO, Envelope, Attenuators, triggers, clock functions) 20/20
- Mutable Instruments Rings (Physical Modeling Resonator/secondary sound source) 14/34
- Mutable Instruments Beads (Granular synthesis/time based effects) 14/48
- Doepfer Wasp Filter* (Filter) 8/56
- Mutable Instruments Plaits (Digital Oscillator/primary sound source) 12/68
- ALM Pamela’s New Workout (Clock) 8/76
- Doepfer A-130-2 (VCA) 4/80
- Befaco InAmp (preamp/external audio input so I can process other instruments through the eurorack) 4/84
[link] [comments]