| 0 | 0 | ||
I bought a used Basimilus Iteritas (original version) last week off Reverb. I used it for a couple hours and then suddenly it stopped working and shorted out my rack (everything connected to that uZeus power supply turned off and the supply did this faint blinking on the +12v light). All it does when I turn the power on is blink this little red LED on the back by the power pins. Once I removed the BI, everything else was working like normal. I searched online for help, but couldn't find anything relevant. I tried a different power cable, different supply, I tried changing the toggle from 12v to 5v, tried cleaning the module a little, nothing is working. Tried emailing Noise Engineering, but I haven't heard back from them yet. Anyone experience anything like this? If it was fried and hopeless, would the little light be blinking?
[link] [comments]
![[-]](http://www.n01ze.com/synthwizards/Forum/images/Carbon/collapse.png "[-]")
