0 | 0 | ||
Hi!
I recently purchased a Doepfer MSY2 in the hopes to sync the arpeggiator/sequencer on my SH101 up to my mixer which outputs MIDI clock (XONE PX5). The problem I am experiencing is the MSY2 clock LED (and as far as I can tell the output clock) doesn't seem to match the BPM being sent from my mixer?
Links to the equipment used:
https://www.thomann.de/gb/cordial_ed_05_aa_elements.htm < connecting Xone to MSY2
https://www.thomann.de/gb/the_sssnake_adapter_cable_6_3_3.5_mm.htm < connecting MSY2 to SH101 clock input
https://shopwl.com/content/XONE%20PX5%206-Channel%20Analogue%20FX%20Mixer%20-%20Manual.pdf < Xone PX5 manual
https://doepfer.de/msy2_m_e.htm < MSY2 Manual
This is my first attempt at using old analogue gear with my set up so I am very much aware I might be completely missing something, however any help would be very much appreciated.
All the best
[link] [comments]