Weirdness triggering my 2HP S+H. Works with gates from Pam's but not LFOs

[SynthWizard]

0			0

Weirdness triggering my 2HP S+H. Works with gates from Pam's but not LFOs

<!-- SC_OFF --><div class="md"><p>I'm trying to follow the patch on Pg 238 of Patch &amp; Tweak to get more generative sequences out of a simple sequencer. The gist of it is 8-step sequencer runs into a S+H. S+H is triggered by an LFO (which also triggers an env) which is out of sync to the clock driving the sequencer. I set Pams to drive the sequencer then multed a square LFO as explained but the S+H is only grabbing voltages once every 10 bars or so, seemingly at random but way slower than the LFO feeding it. The trigger light on the S+H is blinking in time with the LFO and the envelope is firing on time as well. I've tried two LFOs (Chipz and MicroBrute) both with the same result. If I use another channel from Pam's to trigger the S+H it works fine.</p> <p>I've got it passively split right now but I thought maybe the LFO wasn't strong enough so I tried both a buffered mult and offsetting it with additional voltage and neither have helped. I just switched the clock sources, so MicroBrute is driving the 8-step and Pams is controlling S+H and Env and it's working dandy. Any ideas why the S+H only responds to PNW?</p> <p>Edit: On that note, Chipz is such a weird module. The LFO from MicroBrute advances the sequencer one step at a time as expected but Chipz LFO skips a step every time. Maybe because it's unipolar? Offsetting it sometimes gets it to land right and go one step at a time but mostly it skips steps like crazy. Wish I had a 'scope to see what it's putting out.</p> </div><!-- SC_ON --> submitted by <a href="https://www.reddit.com/user/plytheman"> /u/plytheman </a> <br/> <span><a href="https://www.reddit.com/r/modular/comments/lj1m9l/weirdness_triggering_my_2hp_sh_works_with_gates/">[link]</a></span> <span><a href="https://www.reddit.com/r/modular/comments/lj1m9l/weirdness_triggering_my_2hp_sh_works_with_gates/">[comments]</a></span>